Indian systems included
Kalianpur 1880, 1937 and 1975, the India zone grids, UTM zones 42N to 47N on both WGS 84 and Indian datums, and the WGS 84 state systems.
Type an area once and read it in every unit in use in India: bigha, biswa, katha, dhur, guntha, cent, ground, kanal, marla, acre and hectare. Pick your state for its own bigha, or enter the size your land record uses.
Why the bigha needs a number. A bigha is not one size. It is about 6,800 sq ft in western Uttar Pradesh and over 27,000 in the east of the same state, and within a state it can change from one district to the next. The value this page starts with is the one most often quoted for the state you pick; the one on your own land record is the one that counts, so put that in the box and everything below follows from it. The fixed units — acre, hectare, guntha, cent, kanal, marla — do not vary, and need no setting.
Older Indian survey and revenue records sit on the Everest spheroid, not WGS 84. Treating one as the other puts everything a few hundred metres out — enough to move a plot boundary onto a neighbour.
Kalianpur 1880, 1937 and 1975, the India zone grids, UTM zones 42N to 47N on both WGS 84 and Indian datums, and the WGS 84 state systems.
Paste a column straight out of a spreadsheet. Anything after the first two values is carried through as a label, and the result downloads as CSV.
The arithmetic runs in your browser with proj4. No coordinate is transmitted, logged or stored anywhere.
It depends on the state, and often on the district. Commonly quoted figures run from about 6,800 sq ft in Uttarakhand and western Uttar Pradesh to about 27,200 in eastern Uttar Pradesh and Bihar. Choose your state for its usual value, and if your land record gives a different one, type that in.
1,089 sq ft, or about 101.17 square metres. Forty gunthas make an acre, and this does not vary.
One hundred. A cent, also called a decimal, is 435.6 sq ft, a hundredth of an acre.
A kanal is an eighth of an acre, 5,445 sq ft. A marla is a twentieth of a kanal, 272.25 sq ft. Both are used in Punjab, Haryana, Himachal Pradesh and Jammu and Kashmir.
Use the area exactly as your land record states it. A conversion here is for understanding and comparison; the record and a licensed surveyor settle the legal area.
Free, no sign-up, no file size limit — and your data never leaves your machine.
Open the KML converter